real time web analytics
Report - - Cuckoo/Calder Street Mill (Burnley, Lancashire, Apr, 2021) | Industrial Sites | 28DaysLater.co.uk

Report - Cuckoo/Calder Street Mill (Burnley, Lancashire, Apr, 2021)

Hide this ad by donating or subscribing !

urbanchemist

28DL Regular User
Regular User
A small, empty, but previously unrecorded mill I did while wading down the river through Burnley.

History copied from the internet, probably from a book called Burnley Cotton Mills by Jack Nadin.

“Cuckoo Mill on Blackburn Street, is probably Burnley's oldest surviving mill in its original form, and was originally built as a cotton-spinning mill, also known as 'Calder Street Mill'.
A Brewer, named John Hargreaves, first built the mill in 1833, when it was run by a vertical engine with beams, connecting rods and drums, all of which were made of timber.
The mill's location besides the River Calder was deliberate, the water being drawn off to feed the boilers of the engine.
Cuckoo Mill was closed down during the Cotton Famine of 1862-64, failing through the outdated machinery and the effects of the famine itself.
Cuckoo Mill is built four storeys high, with four loading bay windows on the left, and two on the right.
On the gable end wall at the Royle Road end of the building, can be seen the height of the former buildings that used to run up the rest of Blackburn Street, the houses of Robert Varley and Ambrose Wilson in the 1920s.
The area behind the main mill used now, as the scrap yard was the Royle Foundry, a brass works. But John Crook built a spinning mill here along with a foundry about 1800.
The mill was later used as a weaving shed, a bakery and then the foundry. Look also for the stable accommodation on the river side of the building, and the middle wooden bar evidently chewed away by a restless horse.
For many years from the late 1890s, the mill was worked under Stephen Murphy being run as a marine store. By the 1920s, the mill had been taken over by Wallace Reader, and used as a 'marine store' and continues under the Reader’s name to this day."

51155136963_e6521ee434_b.jpg


There is another description of the outside in the listing, https://historicengland.org.uk/listing/the-list/list-entry/1022629.

51154235382_76aedc3376_b.jpg



51154904261_26cce5416f_b.jpg


Historic England says the extension on the end beside the river was an engine house.
I suppose it could have been but it looked more like stables with lightweight floors above for storage.

51154904246_eebaf08377_b.jpg



51154235332_0888821484_b.jpg


Inside pictures are ordered upwards.
The basement has been modernised at some stage and may have been last used as a garage, with a couple of inches of oily water on the floor - just as well I was in waders.

51156010095_cdc2e76ef3_b.jpg



51154904201_d9ee4da1d9_b.jpg



51155689699_4c94ebf627_b.jpg



51154235262_d87225fd0c_b.jpg


Nothing on the ground floor except junk and some old tyres - a rummage yielded no treasure.

51155136813_7c0f9d60d7_b.jpg


The first and second floor were more empty spaces.
The scrap people who own the mill may have have accidentally created the hole in the back wall.

51155689639_0472712297_b.jpg



51156009965_e08d5ed691_b.jpg


Ropes and pulleys above a haulage bay suggested there could still be a hoist in the attic, and indeed there was a fairly early electrically powered one along with a section of line shafting.

51154235217_852e9593c8_b.jpg



51154235182_5d60744306_b.jpg



51154235162_6bb490d736_b.jpg



51154904066_7a444128b0_b.jpg


The roof looks like it was redone within the last few decades.

51155136683_fdf4c07f05_b.jpg


Buildings of similar vintage nearby have been demolished recently - this one is still standing (just) probably because it’s listed.
A final picture from back down in the river.

51155136653_a84be1af77_b.jpg
 

dave

28DL Full Member
28DL Full Member
A bit messy and wrecked in places though beautiful at the same time good little find as Hughie said top notch.
 

Who has read this thread (Total: 171) View details

Top