real time web analytics
Report - - Pen Yr Orsedd slate quarry, Talysarn, North Wales, April 2023 | Mines and Quarries | 28DaysLater.co.uk

Report - Pen Yr Orsedd slate quarry, Talysarn, North Wales, April 2023

Hide this ad by donating or subscribing !

HughieD

28DL Regular User
Regular User
1. The History
Pen-yr-orsedd Slate Quarry is located near the village of Talysarn in the Nantlle valley in North Wales. It was first developed in 1816 as an open working, and subsequently, under the ownership of the Darbishire family, mills were built on three successive levels. The first mill was built in 1860 and two years later in 1862 the first connection to the 3 ft 6 in Nantlle railway was made which extended to all but the highest levels of the quarry. This allowed the carriage of slate to the quay at Caernarfon. A second integrated mill was added in 1870. In 1882 the number of men employed at the quarry had reached 230 men with an annual output of over 8,000 tons. Output further increased in the 1890s when a larger upper mill was built in 1898 as employment increased to over 600 men.

The quarry consisted of a series of pits and a series of four aerial ropeways known as 'Blondins' and their Bruce Peebles electrical equipment which were installed in 1906. These were able to lift trucks of slate from the pit and bring them to the side of the mills for processing.

O/S map extract from 1900 showing the Pen Yr Orsedd:

52838634452_d90a4ef638_b.jpg


Key:
A – lower levels including the old slate mill
B – Mid levels including the admin block and wagon workshops
C – top levels including the blondins and main cutting shed

By 1937, despite the decline of the Welsh slate industry, there were still 351 workers employed at the site. When the Nantlle railway closed in 1963 road transport took over. It also the last quarry in the vale that commercially produced slate until its closure in 1979. The quarry remained in subsequent use, albeit on as small scale, and a lorry road was built down into one pit, rendering the ‘Blondins’ obsolete. After then until production ceased completely in about 2000 and the site has been abandoned ever since, bar the top-level mill which was used for storage.

Here's what ChatGPT had to say:

Pen Yr Orsedd slate quarry is a former slate quarry located in North Wales, United Kingdom. The quarry was in operation from the early 19th century until the early 1960s, producing high-quality slate for use in construction, roofing, and other applications. The quarry was renowned for producing some of the finest slate in the world, and its slate was used in a number of prominent buildings and structures, including the Houses of Parliament in London and the United Nations headquarters in New York. Today, the quarry is no longer operational and has been largely abandoned. However, the site remains a popular destination for hikers and climbers, who come to explore the abandoned buildings and climb the steep slate slopes. The quarry is also a popular location for photographers and filmmakers, who are drawn to the dramatic landscapes and rugged industrial ruins.

2. The Explore
Been a while since I posted a report so good to get back to it. This one of a number of forth-coming reports from my recent trip to North Wales and is a revisit for me. The last time I was here it was early one sunny July morning. With revisits, you always see things you didn’t see first time around plus different weather conditions, quite literally, cast a different light on places. This was very much the case here! The weather couldn’t have been much more different (and worse!) compared to my first trip (see previous report below). It was spitting when I first arrived but by the time I’d reached the top level, the weather had gone “Full Welsh”. Hence after I came out of the main shed, I headed straight back down to my car in the vain hope I wouldn’t get a complete soaking. This turned out to be an epic fail. But well worth the effort. So, not as epic as Dinorwic or Maenoffren but still a fab explore.

Previous report HERE.

3. The Pictures

And so the climb begins:

52830962229_89f6e57f66_b.jpg


Saw these old buildings off in the woods to the left on the way up to the lower levels:

52831228753_9bd844502e_b.jpg


52830211472_f27c5dfdf8_b.jpg


52830779311_98148b791b_b.jpg


52831180005_621902c804_b.jpg


On to the lower level:

52830961814_0d373acaba_b.jpg


52831228368_1f23b6392d_b.jpg


52830778911_84a2a1aba8_b.jpg


52830778901_40524a0bf1_b.jpg


52830961214_9ab751c831_b.jpg


Quick peek in the old lower slate mill:

52830961429_34ceaf15c8_b.jpg


52831227853_2a7b808f61_b.jpg


Pretty much a shell now:

52830210577_b69d4707e7_b.jpg


These old drive shaft wheels are nice though:

52831227658_08866c318f_b.jpg


52830960934_a13148e354_b.jpg


And up to the next level. A flat-bed slate cutter:

52839074096_4259d44e79_b.jpg


First on to the admin/accommodation block:

52830210082_070e359fe9_b.jpg


Still some of the old range left here:

52830209892_d2eb4c991a_b.jpg


Not too sure what this was:

52831227118_1bc277a253_b.jpg


Otherwise it’s slim pickings here:

52830777926_6b58676145_b.jpg


On to the wagon workshops:

52830210147_b9d2dd45c7_b.jpg


In we go:

52839262179_8f0e6e457d_b.jpg


Wheel shaft drives:

52839485625_f95ffb1d79_b.jpg


Love this old slate cutter made by Robinson and Son’s of Rochdale:

52839263229_1e851a36c0_b.jpg


Some sort of vertical cutting machine:

52839522408_163b070b28_b.jpg


And this little fella a floor level:

52838508562_ded9a270c6_b.jpg


An old grinding wheel:

52838505557_a08c0720c1_b.jpg


And the cutest turntable you are ever likely to see:

52839521303_e0d745b693_b.jpg


Some old wooden storage. Someone's pushed it over since my last visit:

52831116658_a34d8464fd_b.jpg


To be continued....
 
Last edited:

HughieD

28DL Regular User
Regular User
PART 2:

Overall, a nice part of the quarry:

52830101462_508796543e_b.jpg


52831117463_35c8902a36_b.jpg


52830101727_f5014b8d60_b.jpg


This looks like a dedicated storage area:

52830851279_fccdc7d956_b.jpg


The proverbial rusty hook!

52839259394_22c22d2825_b.jpg


Looking back over the mid-levels:

52839482885_b83549c5da_b.jpg


52839073996_23f7922dc3_b.jpg


And the miners steps up to the top level:

52831068440_a5edec0ae9_b.jpg


A quick look in this winding house:

52831068390_ec66677936_b.jpg


52829750517_19b84ea688_b.jpg


Before moving on to the now wide-open main shed:

52830320006_4c2c083776_b.jpg


52830501429_12ea58b1af_b.jpg


Some of the few things left behind in the top shed:

52830766743_a1af63bf8e_b.jpg


52839480195_119378bcb1_b.jpg


And some of the old electrics:

52830319221_ba56a860b0_b.jpg


52830766293_93f4c2ccc9_b.jpg


And this old dust-extraction system:

52830500964_cef2e7dce6_b.jpg


At that point was going to look at the few huts on the rim of the upper quarry and the quarry itself but with the rain siling down, thought better of it and headed back down.
 
Last edited:

HughieD

28DL Regular User
Regular User
That is one really nice place similar to Maenofferen but actually better IMO.
There's much more surface stuff here than at Maenofferen, must be like 10 winding gears about and of course the Blondin is still standing. Park at the top and walk down though much easier.
Dunno, still really love Maenofferen. Plus it's got all the underground stuff too. Very much worth a visit here though, for sure.
 

Mikeymutt

28DL Regular User
Regular User
That's cracking that mate. So much to see, I could spend hours here. I really need a few days in Wales going to these old quarries, me and my mate were talking about it. Beautiful photogenic area, lovely crumbling industrial remains. If I lived in Wales I would spend hours hunting these out.
 

HughieD

28DL Regular User
Regular User
That's cracking that mate. So much to see, I could spend hours here. I really need a few days in Wales going to these old quarries, me and my mate were talking about it. Beautiful photogenic area, lovely crumbling industrial remains. If I lived in Wales I would spend hours hunting these out.
Thank you. You need to mate. So much to go at, both overground and underground. Let me know if you need any info.
 

Who has read this thread (Total: 169) View details

Top